Gobernador EG2000

L6000.00

Agotado

EG2000 is an universal generator governor / engine speed controller equipped with Smoke Limiting, & Idle Speed. Suitable for diesel, gas and natural gas engines with Built-in & Non-Built-in PTs Pumps, also can be used with Low Current, Electric over Hydraulic Oil Pumps Type Governor Actuators. It's compatible with following model.

*EG1065X and EG1069X have ceased production and will be replaced by Kutai EG2000.

Features of EG2000 Speed Control Unit

· Works on a wide ranges of MPU/flywheel frequencies

· 15 Amp Max Output

· Suitable for all types of diesel and Gas engines

· High Sensitivity and stable at Low Frequency Variations

· Moisture, vibration, and rust protected, Epoxy encapsulated electronics

· For Use With Isochronous Generators & Automatic Paralleling PLC controls

· Idle Speed Adjustment and connections for a Remote Speed POT

Operating Voltage	10 VDC to 30 VDC
Output Current	From 0.5 Amp to 15 Amp
Frequency Range	600 Hz ~ 9500 Hz (PMG Signal)
Idle Speed Frequency	Adjustable From 30~85% of normal
Speed Band	±0.25% at steady state
Temp. Stability	Between -40~85 °C Better than ±0.5%
Remote Speed Adjustment Range (2 mode)	Adjustable Range ±5% with 5 K Ohm potentiometer
Ramp Time	3 to 20 Sec. (Adjustable)
Operation Environment	Operation Temp. : -40~85 °C Storage Temp. : -40~85 °C Relative Humidity : Maximum 95% Vibration : 3G @ 100~2 KHz
DIP Switch Description	SW1 : ON 600~1200 Hz SW2 : ON 1200~2500 Hz SW3 : ON 2500~5000 Hz SW4 : ON 5000~9500 Hz
Governor Controls	DROOP : Droop Rate Adjustment GAIN : MPU Output Gain Adjustment Int. : Engine Stability Adjustment RAMP-TIME : Soft Start Adjustment SPEED : Speed Adjustment IDLE : Idle Speed Adjustment

Gobernador EG2000

Horarios de atención